Use the directional Wireless Panel Antenna
to transmit a wireless signal to one particular wireless device (laptop, camera or other wireless receivers) to boost the maximum range of transmission to a few meters. The main problem with this type of antenna is its high cost and limited number of locations for installing it. A clear line of sight between the wireless device and the antenna is required in order to receive optimal performance.
When installing the wireless panel antenna, you need to determine the optimal position to put it. It's possible to get a receiver that comes with its own stand for supporting the weight of the unit and the base. However, you can just as well use the existing stand as long as there's space available. Then, you can put the base at the ideal height for your camera.
There are several recommendations for the optimum location of the wireless panel antenna
. You can set it up on a tripod stand for stability. Another option is to place it at a higher level above the area you wish to monitor, while using a lower stand to support the unit. If you're extending the range of one camera paired with a wireless microphone, it's recommended that you use the omnidirectional antennas. These are recommended installation methods because they give the best performance.
In a nutshell, the omnidirectional wireless panel antenna
is a type of wireless antenna that can transmit signals in any direction. This type can also be extended in any direction, and thus offer a much wider bandwidth compared with the others. The best thing about this wireless system is that you can use it wherever you go. You can even mount it on a tripod or a handheld stand.
For example, if you'll monitor three cameras at different areas from your office or home, then you can connect each individual wireless panel antenna by connecting a transmitter in the middle. Since they have the same signal strength, they can both transmit the same information and extend the range of one camera paired to a dual antenna receiver. When monitoring only two cameras, a single wireless panel antenna can serve well enough.
This kind of wireless panel antenna can support both 2.4 and 5.8 GHz band widths. This is important since the longer range of your wireless device can cover, the less interference it will experience. An antenna with higher bandwidth can easily cover a distance of 150 feet, and this can be very useful for home or office users who use wifi beams frequently to connect to the internet. The lower limit of this antenna can support only half that distance, which means you'll have to hang it just a little bit higher to prevent unnecessary interference. A good tip is to use the same frequency for both antennas.